The Presenter combines a microphone preamp and a USB program input to create the ultimate interface for any presentation, from school lectures to corporate audio. It replaces bulky and complicated mixers that can be difficult to use, offer unnecessary features, and often require special adaptor cables to connect to. Instead, the Presenter provides a simple and streamlined feature set that is as intuitive as it is powerful.
The Presenter’s compact chassis houses a microphone input, a USB connection for playback from a laptop, and XLR outputs to feed your powered speakers. Simply connect your laptop via USB to send high quality audio through the Presenter and provide power to the device, plug in any microphone, and then connect to your speakers. Separate level controls for the microphone and the laptop audio allow you adjust the balance between the two, and a low cut filter and EQ controls help adjust the tone of the microphone to suit the room acoustics and the voice of the person who will be speaking. Additionally, should you need to playback audio from a smartphone, tablet or any other portable device, the Presenter has a 3.5mm stereo input jack that also feeds the program level control. This connection overrides the USB output, making it ideal for accommodating ‘aux cord DJs’ at a wedding reception or dance.
With the Presenter, not only will you improve the audio for your next event, you’ll also reduce setup time and virtually eliminate troubleshooting.
- Mic preamp with phantom power & EQ controls
- USB connection for high quality audio playback from a laptop
- Easily connect a smartphone or tablet with a 3.5mm TRS input
- Balanced outputs to feed a pair of powered speakers or a PA System
Presenter™ - Applications
Using the Presenter for a lecture or speech

Using the Presenter for wedding receptions and dances

Using the Presenter with wireless microphones

Specifications |
|
Audio Circuit Type: |
Active Preamplifier Circuit with digital to analog input conversion |
Number of Channels: |
2 |
Frequency Response: |
20Hz to 20kHz (-0.4dB/0dB) |
Noise Floor: |
-84dBu |
Dynamic Range: |
+91dBu |
Maximum Input: |
+7dBu |
Gain: |
+52dBu |
Indermodulation Distortion: |
0.003% @0dBu, 0.01% @ -10dBu, 0.03% @-20dBu |
Total Harmonic Distortion: |
0.004% @20Hz, 0.004% @1kHz, 0.004% @10kHz |
Phase Deviation: |
-28° @ 20Hz, -1° @ 1kHz, +2° @ 10kHz |
Input Impedance: |
10kΩ |
Output Impedance - XLR Output: |
2.74kΩ |
Insertion Loss: |
0dB |
Features |
|
Input Connections: |
XLR, 3.5mm stereo, USB 2.0 type B |
Ground Lift: |
Main Output |
LED Indicators |
Power, 48V, USB |
General |
|
Power: |
5V USB |
Construction: |
14-gauge steel chassis |
Finish: |
Durable powder coat |
Size: (W x H x D) |
4.75" x 5" x 2" (121 x 127 x 51mm) |
Shipping Size: (W x H x D) |
5" x 11" x 2.75" (127 x 280 x 70mm) |
Weight: |
1.5lb (0.7kg) |
Shipping Weight: |
2.15lb (0.97kg) |
FCC Approval: |
Complies with section 15 of the FCC Rules |
Conditions: |
For use in dry locations only between 5°C and 40°C |
Power Supply Part Number: |
R800 9407 00 - CANADA, USA, TAIWAN R800 9407 01 |
Warranty: |
|
Specifications are subject to change without notice. |
No Video Available